Product Range:
(C) Paper Life Limited 2005
Site Design:Phil Travis-James Nelson
ELECTROSTATIC LOCATOR
PRODUCT REF: PLE01
This is a fully portable miniaturised instrument, which detects the presence and polarity of static electricity.
CONDUCTIVE TINSEL
PRODUCT REF: PLE02
A simple method to eliminate electro-static charges particularly at the feeder. Using three copper wires for the tinsel core to ensure good mechanical strength and electrical conductivity the tinsel lahn or strands have been microscopically honed to produce a sharp edge at each upper tip to improve conductivity.
STATIC ELIMINATION BAR
PRODUCT REF: PLE031: STANDARD or PLE032: WITH AIR
A shockless micro electro-static eliminator can be ordered in incremental lengths of 20mm. Operating Potential: 5kv for a sine wake of7kv peak for other wave forms. Effectiveness: 0.035millamperes per mm of effective length at 10mm distance from the paper surface. Shock Hazard: shockless (less than 40 microamperes per point short circuited).
5kv POWER SUPPLY
PRODUCT REF: PLE04
This reliable and safety
conscious power supply is suitable for all theequipment shown here
requiring a 5kv feed. It includes an internal fusible protection circuit
and spring loaded outlets which eliminate radio frequency. Output:
5kv rms, 5 milliamps; load: 2,000 picofarads; max. Frequency:
50&60HZ. Duty – continuous encapsulation; all high voltage
components.
DESTATICISING
AIRBLOWER
PRODUCT REF: PLE05
Where electro-static charges
are such that the feeder is constantly picking up several sheets at a time
a reliable method of discharging the static is to use a destaticising
air blower.
IONIZING AIR GUN
PRODUCT REF: PLEO6/1 ONE GUN &
POWER SUPPLY
PLE06/2 GUN
ONLY
The ionizing gun neutralizes static electricity and also cleans under folders or binding equipment. It therefore removes slitter and other paper dust by blasting with ionized air.
